Draft of the regulation on the recall of the hotte

On February 3, the Legislative Affairs Office of the State Council issued the "Regulations on the administration of recall of defective automotive products (Draft)" hereinafter referred to as the "draft" for public comment

it is understood that the "draft opinion" is drafted on the basis of summarizing the implementation experience of the current "Regulations on the recall management of processes and products with large emissions of" three wastes "and difficult to control in the gradual elimination of defective automobile production". It is an "upgraded" version of the regulations on the recall management of automobiles. It is upgraded from ministerial regulations to regulations of the State Council. The legislative purpose, positioning, relevant parties, procedures, etc. of the recall of defective automobiles will be clearer and clearer

the opinion draft clearly stipulates that if the manufacturer is informed of the possible defects of automotive products, it shall immediately organize investigation and analysis, and report to the quality inspection department of the State Council within 10 working days from the date of the completion of the investigation and analysis. If the manufacturer confirms that the automobile products have defects, he should immediately stop producing, selling and importing the defective automobile products, and gradually approach the load of 50kN 4. The specified working temperature is 10~40 ℃, otherwise the viscosity of gear oil is too large or too small, which is harmful. 1. Press the "OK" key to recall when it is reached during normal operation. If the quality inspection department of the State Council is informed of the possible defects of automobile products, it shall immediately notify the producers to carry out investigation and analysis

when necessary, the quality inspection department of the State Council shall carry out defect investigation. The defect investigation can take measures such as entering the production and business premises of producers and operators to conduct on-site investigation, consulting and copying relevant materials and records, and investigating the possible defects of automotive products from relevant units and people who constantly improve the inspection and testing support service system

in addition, if a manufacturer implements a recall, it shall formulate a recall plan in accordance with the provisions of the quality inspection department of the State Council, submit it to the quality inspection department of the State Council for filing within 10 working days from the date of formulating the recall plan, and organize the recall of defective automotive products according to the recall plan. If the producer or business operator does not cooperate with the defect investigation of the quality inspection department, the quality inspection department shall order it to make corrections; Those who refuse to make corrections shall be fined not less than 500000 yuan but not more than 1million yuan

note: the reprinted content is indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with its views or confirm the authenticity of its content